|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD -96298 IRFH5207PBF HEXFET(R) Power MOSFET VDS RDS(on) max (@VGS = 10V) 75 9.6 39 1.7 71 V m nC A PQFN 5X6 mm Qg (typical) RG (typical) ID (@Tc(Bottom) = 25C) Applications * * * * Secondary Side Synchronous Rectification Inverters for DC Motors DC-DC Brick Applications Boost Converters Features and Benefits Features Benefits Low RDSon (< 9.6 m) Low Thermal Resistance to PCB (< 1.2C/W) 100% Rg tested Low Profile (<0.9 mm) results in Industry-Standard Pinout Compatible with Existing Surface Mount Techniques RoHS Compliant Containing no Lead, no Bromide and no Halogen MSL1, Industrial Qualification Lower Conduction Losses Enables better thermal dissipation Increased Reliability Increased Power Density Multi-Vendor Compatibility Easier Manufacturing Environmentally Friendlier Increased Reliability Orderable part number IRFH5207TRPBF IRFH5207TR2PBF Package Type PQFN 5mm x 6mm PQFN 5mm x 6mm Standard Pack Form Quantity Tape and Reel 4000 400 Tape and Reel Note Absolute Maximum Ratings VDS VGS ID @ TA = 25C ID @ TA = 70C ID @ TC(Bottom) = 25C ID @ TC(Bottom) = 100C IDM PD @TA = 25C PD @ TC(Bottom) = 25C TJ TSTG Parameter Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Power Dissipation Max. 75 20 13 11 71 45 285 3.6 105 0.029 -55 to + 150 Units V A g g c W W/C C Linear Derating Factor Operating Junction and Storage Temperature Range g Notes through are on page 8 www.irf.com 1 04/12/10 IRFH5207PBF Static @ TJ = 25C (unless otherwise specified) BVDSS VDSS/TJ RDS(on) VGS(th) VGS(th) IDSS IGSS gfs Qg Qgs1 Qgs2 Qgd Qgodr Qsw Qoss RG td(on) tr td(off) tf Ciss Coss Crss Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Gate Threshold Voltage Coefficient Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Forward Transconductance Total Gate Charge Pre-Vth Gate-to-Source Charge Post-Vth Gate-to-Source Charge Gate-to-Drain Charge Gate Charge Overdrive Switch Charge (Qgs2 + Qgd) Output Charge Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. 75 --- --- 2.0 --- --- --- --- --- 51 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- 0.09 8.0 --- -8.9 --- --- --- --- --- 39 6.6 3.1 13 16 16 13 1.7 7.2 12 20 7.1 2474 313 133 Max. Units Conditions --- V VGS = 0V, ID = 250uA --- V/C Reference to 25C, ID = 1.0mA 9.6 m VGS = 10V, ID = 43A 4.0 V VDS = VGS, ID = 100A --- mV/C VDS = 75V, VGS = 0V 20 A 250 VDS = 75V, VGS = 0V, TJ = 125C VGS = 20V 100 nA -100 VGS = -20V --- S VDS = 25V, ID = 43A 59 --- VDS = 38V VGS = 10V --- nC --- ID = 43A --- --- --- nC VDS = 16V, VGS = 0V e --- --- --- --- --- --- --- --- ns VDD = 38V, VGS = 10V ID = 43A RG=1.7 VGS = 0V VDS = 25V = 1.0MHz pF Avalanche Characteristics EAS IAR Parameter Single Pulse Avalanche Energy Avalanche Current d Min. --- --- Typ. --- --- Typ. --- --- Max. 87 43 Units mJ A Diode Characteristics IS ISM VSD trr Qrr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode)A Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Max. Units 71 A 285 Conditions MOSFET symbol showing the integral reverse G S D --- --- 1.3 V --- 26 39 ns --- 130 195 nC Time is dominated by parasitic Inductance p-n junction diode. TJ = 25C, IS = 43A, VGS = 0V TJ = 25C, IF = 43A, VDD = 38V di/dt = 500A/s e eA Thermal Resistance RJC (Bottom) RJC (Top) RJA RJA (<10s) Junction-to-Case Junction-to-Case Junction-to-Ambient Junction-to-Ambient f f Parameter g g Typ. --- --- --- --- Max. 1.2 15 35 22 Units C/W 2 www.irf.com IRFH5207PBF 1000 TOP VGS 15V 10V 7.00V 5.00V 4.75V 4.50V 4.25V 4.00V 1000 TOP VGS 15V 10V 7.00V 5.00V 4.75V 4.50V 4.25V 4.00V ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) 100 100 BOTTOM 10 BOTTOM 1 4.0V 0.1 10 4.0V 60s PULSE WIDTH 0.01 0.1 1 Tj = 25C 1 60s PULSE WIDTH Tj = 150C 0.1 1 10 100 10 100 V DS, Drain-to-Source Voltage (V) V DS, Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics 1000 RDS(on) , Drain-to-Source On Resistance (Normalized) Fig 2. Typical Output Characteristics 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 ID = 43A VGS = 10V ID, Drain-to-Source Current (A) 100 10 T J = 150C 1 T J = 25C VDS = 25V 60s PULSE WIDTH 0.1 2 3 4 5 6 7 8 9 10 -60 -40 -20 0 20 40 60 80 100 120 140 160 VGS, Gate-to-Source Voltage (V) TJ , Junction Temperature (C) Fig 3. Typical Transfer Characteristics 100000 VGS = 0V, f = 1 MHZ C iss = C gs + C gd, C ds SHORTED C rss = C gd C oss = C ds + C gd Fig 4. Normalized On-Resistance Vs. Temperature 14 ID= 43A VDS= 60V VDS= 38V VDS= 15V 10000 C, Capacitance (pF) VGS, Gate-to-Source Voltage (V) 12 10 8 6 4 2 0 Ciss 1000 Coss 100 Crss 10 1 10 VDS, Drain-to-Source Voltage (V) 100 0 10 20 30 40 50 60 QG, Total Gate Charge (nC) Fig 5. Typical Capacitance Vs.Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs.Gate-to-Source Voltage www.irf.com 3 IRFH5207PBF 1000 1000 OPERATION IN THIS AREA LIMITED BY RDS(on) ISD, Reverse Drain Current (A) ID, Drain-to-Source Current (A) 100 T J = 150C 100 100sec T J = 25C 10 10 1msec 10msec 1 Tc = 25C Tj = 150C Single Pulse 0.1 0.10 1 10 100 VDS, Drain-to-Source Voltage (V) VGS = 0V 1.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VSD, Source-to-Drain Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage 75 Fig 8. Maximum Safe Operating Area 5.0 60 ID, Drain Current (A) VGS(th), Gate threshold Voltage (V) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 ID = 1.0A ID = 1.0mA ID = 150A ID = 100A 45 30 15 0 25 50 75 100 125 150 T C , Case Temperature (C) -75 -50 -25 0 25 50 75 100 125 150 T J , Temperature ( C ) Fig 9. Maximum Drain Current Vs. Case (Bottom) Temperature 10 Thermal Response ( Z thJC ) C/W Fig 10. Threshold Voltage Vs. Temperature 1 D = 0.50 0.20 0.1 0.10 0.05 0.02 0.01 SINGLE PULSE ( THERMAL RESPONSE ) Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.001 0.01 0.1 0.01 0.001 1E-006 1E-005 0.0001 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case (Bottom) 4 www.irf.com IRFH5207PBF RDS(on), Drain-to -Source On Resistance (m ) 25 ID = 43A 20 EAS , Single Pulse Avalanche Energy (mJ) 400 350 300 250 200 150 100 50 0 ID 4.4A 11A BOTTOM 43A TOP 15 T J = 125C 10 T J = 25C 5 4 6 8 10 12 14 16 18 20 25 50 75 100 125 150 VGS, Gate -to -Source Voltage (V) Starting T J , Junction Temperature (C) Fig 12. On-Resistance vs. Gate Voltage Fig 13. Maximum Avalanche Energy vs. Drain Current V(BR)DSS 15V tp VDS L DRIVER RG 20V D.U.T IAS tp + V - DD A I AS 0.01 Fig 14a. Unclamped Inductive Test Circuit Fig 14b. Unclamped Inductive Waveforms VDS VGS RG V10V GS Pulse Width 1 s Duty Factor 0.1 RD 90% D.U.T. + VDS -VDD 10% VGS td(on) tr td(off) tf Fig 15a. Switching Time Test Circuit Fig 15b. Switching Time Waveforms www.irf.com 5 IRFH5207PBF D.U.T Driver Gate Drive + P.W. Period D= P.W. Period VGS=10V + Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer * D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt - - + RG * * * * dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test V DD VDD + - Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% ISD * VGS = 5V for Logic Level Devices Fig 16. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET(R) Power MOSFETs Vds Vgs Id L 0 DUT 1K S VCC Vgs(th) Qgs1 Qgs2 Qgd Qgodr Fig 17. Gate Charge Test Circuit Fig 18. Gate Charge Waveform 6 www.irf.com IRFH5207PBF PQFN 5x6 Outline "B" Package Details For footprint and stencil design recommendations, please refer to application note AN-1154 at http://www.irf.com/technical-info/appnotes/an-1154.pdf PQFN 5x6 Outline "B" Part Marking INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY SITE CODE (Per SCOP 200-002) PIN 1 IDENTIFIER XXXX XYWWX XXXXX PART NUMBER ("4 or 5 digits") MARKING CODE (Per Marking Spec) LOT CODE (Eng Mode - Min last 4 digits of EATI#) (Prod Mode - 4 digits of SPN code) Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ www.irf.com 7 IRFH5207PBF PQFN 5x6 Outline "B" Tape and Reel Qualification information Qualification level Moisture Sensitivity Level RoHS compliant Indus trial (per JE DE C JE S D47F PQFN 5mm x 6mm Yes guidelines ) MS L1 (per JE DE C J-S T D-020D ) Qualification standards can be found at International Rectifier's web site http://www.irf.com/product-info/reliability Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information: http://www.irf.com/whoto-call/salesrep/ Applicable version of JEDEC standard at the time of product release. Notes: Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25C, L = 0.095mH, RG = 50, IAS = 43A. Pulse width 400s; duty cycle 2%. R is measured at TJ of approximately 90C. When mounted on 1 inch square 2 oz copper pad on 1.5x1.5 in. board of FR-4 material. Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.04/2010 8 www.irf.com |
Price & Availability of IRFH5207PBF |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |